
COPPER SLAG or IRON SILICATE
processed for abrasive / blasting use
Introduction
We are offering fully processed and graded Copper Slag (iron silicate) to be used for blasting / cleaning and various other applications. SUVINO Group is the sole exporter of processed Copper Slag from India. We have a captive plant in Joint Venture with a capacity to process 3,000 MT per month to cater to its exclusive requirements. The plant is situated at Tuticorin, which has a major Port with container terminal, giving us freight advantage.
Chemical Properties of Copper Slag
S. No.
Property
Typical Analysis
1. Iron Oxide – Fe2O3 (% wt)55.00
2. Silica – SiO2 (% wt)35.00
3. Aluminium Oxide – Al2O3 (% wt)3.01
4.
Calcium Oxide – CaO (% wt)
0.20
5.
Magnesium Oxide – MgO (% wt)
0.90
6.
Copper – Cu (% wt)
0.42
7.
Titanium Di-oxide (% wt)
0.60
8.
Potassium Oxide (% wt)
1.02
The above is typical analysis and values for specific consignments can vary.
Carbonates, sulphates, arsenic, cadmium, lead, selerium – Not detected.
Physical Properties of Copper Slag
S. No.
Property
Analysis
9.
Hardness, Moh’s Scale
7
10.
Specific Gravity
3.83
11.
Electric Conductivity
4.8 mS/m
12.
Chloride content
< 0.0002
13.
Granule Shape
Angular, Sharp edges, Multifaceted
14.
Particle Size
As per gradations required by the buyers.
0.2mm upto 3.0mm
Standard Packing Options –
50 kgs new PP laminated bags (Palletization optional)
2 MT jumbo bags
Maximum 28 MT loading per 20’ HD FCL.
Bags will have our standard printing.
SUVINO-GRIT offers cost effective solutions for all the following industries / applications –
Shipyards
Fabrication Yards
Blasting Cabinet Applications
Tank farms
Concrete Bridge and Structures
Structural Steel Constructions
Pipelines
Offshore & Onshore applications
Chemical and Process Industries
Oil Refineries and Platforms
Cement Industry
Concrete Products Industry
Power Plants
Marine Industry
SUVINO-GRIT
1. Complies with all the health and safety regulations of most countries worldwide.
2. Is widely recognized as a safe blasting medium, provided, all customary and statutory safety precautions (such as use of protective gear and approved respiratory apparatus) are followed.
3. Is manufactured to conform to the ISO 11126-3 standards applicable for copper refinery slag abrasive.
Unique features of SUVINO-GRIT
Safe and cleaner
Dust free abrasive
High Quality
High efficiency
Cuts faster
Low Man-hours
Near to White metal finish
No embedments
Surface finish upto SA3
Cost effective solutions
SUVINO-GRIT particle sizes and recommended applications
Sr. No.
Particle Size
(mm)
Approximate Anchor Pattern (Microns)
Recommended Applications
1
0.20 to 0.50
30 – 40
Light treatment of steel, aluminium, new steel, mill scale
20.30 to 0.85
30 – 50
Denim blasting
3
0.20 to 1.00
40 – 50
Treatment of steel & metal constructions where high grade of cleanliness & light anchor pattern is required
4
0.20 to 1.50
60 – 80
General usage in all mill scale, paint stripping applications, as well as on new steel
5
0.50 to 1.50
70 – 100
General usage for all tank internals as well as at places where dust emissions are to be kept at low levels
6
0.20 – 2.50
0.50 – 2.50
90 – 120
Treatment of heavily corroded steel, concrete surfaces, production platforms, oilfield installations, pipelines, ship hulls, all marine applications
7
0.80 – 2.20
90 – 110
Same applications as above but finer particles are eliminated where no pitted corrosions are to be cleaned
8
1.00 – 3.00
2.00 – 3.00
120 – 150
Used for removal of heavy paint layers, rust, etc.
To enable us to quote for your requirement, kindly give us the following info –
1. Particle size required (You may choose from above or give your own range)
2. Packing required
3. Loading permissible per 20’ HD FCL, if in containers
4. Quantity required with delivery schedule
5. Destination port
6. Payment terms
7. Discharge rate at destination, if in break-bulk
8. Any other point which may impact quote
We can also offer ungraded material for shipments in bulk in any quantities as desired by our buyers on FOB or CNF FO basis terms.
processed for abrasive / blasting use
Introduction
We are offering fully processed and graded Copper Slag (iron silicate) to be used for blasting / cleaning and various other applications. SUVINO Group is the sole exporter of processed Copper Slag from India. We have a captive plant in Joint Venture with a capacity to process 3,000 MT per month to cater to its exclusive requirements. The plant is situated at Tuticorin, which has a major Port with container terminal, giving us freight advantage.
Chemical Properties of Copper Slag
S. No.
Property
Typical Analysis
1. Iron Oxide – Fe2O3 (% wt)55.00
2. Silica – SiO2 (% wt)35.00
3. Aluminium Oxide – Al2O3 (% wt)3.01
4.
Calcium Oxide – CaO (% wt)
0.20
5.
Magnesium Oxide – MgO (% wt)
0.90
6.
Copper – Cu (% wt)
0.42
7.
Titanium Di-oxide (% wt)
0.60
8.
Potassium Oxide (% wt)
1.02
The above is typical analysis and values for specific consignments can vary.
Carbonates, sulphates, arsenic, cadmium, lead, selerium – Not detected.
Physical Properties of Copper Slag
S. No.
Property
Analysis
9.
Hardness, Moh’s Scale
7
10.
Specific Gravity
3.83
11.
Electric Conductivity
4.8 mS/m
12.
Chloride content
< 0.0002
13.
Granule Shape
Angular, Sharp edges, Multifaceted
14.
Particle Size
As per gradations required by the buyers.
0.2mm upto 3.0mm
Standard Packing Options –
50 kgs new PP laminated bags (Palletization optional)
2 MT jumbo bags
Maximum 28 MT loading per 20’ HD FCL.
Bags will have our standard printing.
SUVINO-GRIT offers cost effective solutions for all the following industries / applications –
Shipyards
Fabrication Yards
Blasting Cabinet Applications
Tank farms
Concrete Bridge and Structures
Structural Steel Constructions
Pipelines
Offshore & Onshore applications
Chemical and Process Industries
Oil Refineries and Platforms
Cement Industry
Concrete Products Industry
Power Plants
Marine Industry
SUVINO-GRIT
1. Complies with all the health and safety regulations of most countries worldwide.
2. Is widely recognized as a safe blasting medium, provided, all customary and statutory safety precautions (such as use of protective gear and approved respiratory apparatus) are followed.
3. Is manufactured to conform to the ISO 11126-3 standards applicable for copper refinery slag abrasive.
Unique features of SUVINO-GRIT
Safe and cleaner
Dust free abrasive
High Quality
High efficiency
Cuts faster
Low Man-hours
Near to White metal finish
No embedments
Surface finish upto SA3
Cost effective solutions
SUVINO-GRIT particle sizes and recommended applications
Sr. No.
Particle Size
(mm)
Approximate Anchor Pattern (Microns)
Recommended Applications
1
0.20 to 0.50
30 – 40
Light treatment of steel, aluminium, new steel, mill scale
20.30 to 0.85
30 – 50
Denim blasting
3
0.20 to 1.00
40 – 50
Treatment of steel & metal constructions where high grade of cleanliness & light anchor pattern is required
4
0.20 to 1.50
60 – 80
General usage in all mill scale, paint stripping applications, as well as on new steel
5
0.50 to 1.50
70 – 100
General usage for all tank internals as well as at places where dust emissions are to be kept at low levels
6
0.20 – 2.50
0.50 – 2.50
90 – 120
Treatment of heavily corroded steel, concrete surfaces, production platforms, oilfield installations, pipelines, ship hulls, all marine applications
7
0.80 – 2.20
90 – 110
Same applications as above but finer particles are eliminated where no pitted corrosions are to be cleaned
8
1.00 – 3.00
2.00 – 3.00
120 – 150
Used for removal of heavy paint layers, rust, etc.
To enable us to quote for your requirement, kindly give us the following info –
1. Particle size required (You may choose from above or give your own range)
2. Packing required
3. Loading permissible per 20’ HD FCL, if in containers
4. Quantity required with delivery schedule
5. Destination port
6. Payment terms
7. Discharge rate at destination, if in break-bulk
8. Any other point which may impact quote
We can also offer ungraded material for shipments in bulk in any quantities as desired by our buyers on FOB or CNF FO basis terms.